Toshiba TC-net 100 User Manual

3. How to set the environments for connecting OPC
20
3.1. DCOM Setting
When did DCOM setting at the time of installation, this setting is unnecessary.
The dcomcnfg command is a command to make the security setting to execute OPC
communications through the computer network.
3.1.1. On Windows 8.1/ Windows 7 / Windows Vista /
Windows Server 2012 R2/ Windows Server 2008 R2/
Windows Server 2008 /
●
DCOMCNFG Setting
On Windows 8.1/On Windows Server 2012 R2
<1> Open the menu by right-clicking the left side on
the task bar, Click [Run] on the menu
Enter “dcomcnfg” in the “Run” dialog and click
<OK>.
Figure3.1 DCOMCNFG Setting (Windows 8.1/Windows Server 2012 R2)
Others
<1> Click [Start] on start menu
Enter “dcomcnfg” in “Start Search” box and
push <ENTER> key.
Figure 3.2 DCOMCNFG Setting (Windows 7/Windows Vista/Windows Server 2008 R2/Windows Server 2008)

Toshiba TC-net 100 Specifications

General

Brand	Toshiba
Model	TC-net 100
Category	Network Hardware
Language	English