Toshiba TOSVERT VFS15-4037PL-W User Manual

E6581611
K-30
11
11.6 Input Terminal Function
It can be assigned the function No. in the following table to parameter f104, f108, f110 to f118, f151 to
f156, a973 to a976.
 Table of input terminal functions 1
Function
No.
Code Function Action Reference
0,1 - No function Disabled -
2 F Forward run command ON: Forward run, OFF: Deceleration stop 3.2.1
3 FN Inversion of forward run command Inversion of F 7.2.1
4 R Reverse run command ON: Reverse run, OFF: Deceleration stop
5 RN Inversion of reverse run command Inversion of R
6 ST Standby ON: Ready for operation
OFF: Coast stop (gate OFF)
3.2.1
5.9
7 STN Inversion of standby Inversion of ST 6.7.1
6.34.8
8 RES Reset command 1 *2 ON: Acceptance of reset command, ON → OFF: Trip reset 13.2
9 RESN Inversion of reset command 1 *2 Inversion of RES
10 SS1 Preset-speed command 1
Selection of 15-speed SS1 to SS4 (SS1N to SS4N) (4 bits)
5.7
11 SS1N Inversion of preset-speed command 1 7.2.1
12 SS2 Preset-speed command 2
13 SS2N Inversion of preset-speed command 2
14 SS3 Preset-speed command 3
15 SS3N Inversion of preset-speed command 3
16 SS4 Preset-speed command 4 5.7
17 SS4N Inversion of preset-speed command 4
18 JOG Jog run mode ON: Jogging mode, OFF: Jog run canceled 6.14
19 JOGN Inversion of jog run mode Inversion of JOG
20 EXT Emergency stop by external signal ON:  trip stop, OFF: After stopped by f603, e trip 6.29.4
21 EXTN Inversion of emergency stop by external signal Inversion of EXT
22 DB DC braking command ON: DC braking, OFF: Brake canceled 6.12.1
23 DBN Inversion of DC braking command Inversion of DB
24 AD2 2nd acceleration/deceleration ON: Acceleration/deceleration 2
OFF: Acceleration/deceleration 1
6.8.1
6.27.2
25 AD2N Inversion of 2nd acceleration/deceleration Inversion of AD2
26 AD3 3rd acceleration/deceleration ON: Acceleration/deceleration 3
OFF: Acceleration/deceleration 1 or 2
27 AD3N Inversion of 3rd acceleration/deceleration Inversion of AD3
28 VF2 2nd V/F control mode switching ON: 2nd V/F control mode
(V/F fixed, , , ,  (thr when
f632=2 or 3))
OFF: 1st V/F control mode
( setting, , , , )
6.8.1
29 VF2N Inversion of 2nd V/F control mode switching Inversion of VF2
32 OCS2 2nd stall prevention level ON: Enabled at the value of ,  and 
OFF: Enabled at the value of ,  and 
6.8.1
6.29.2
33 OCS2N Inversion of 2nd stall prevention level Inversion of OCS2
36 PID PID control prohibition ON: PID control prohibited, OFF: PID control enabled 6.24
37 PIDN Inversion of PID control prohibition Inversion of PID
46 OH2 External thermal error input ON: oh2 trip stop, OFF: Disabled 7.2.1
47 OH2N Inversion of external thermal error input Inversion of OH2
48 SCLC Forced local from communication Enabled during communication
ON: Local (Setting of , )
OFF: Communication
6.2.1
6.38
49 SCLCN Inversion of forced local from communication Inversion of SCLC
50 HD Operation hold (hold of 3-wire operation) ON: F (forward run), R: (reverse run) held, 3-wire operation
OFF: Deceleration stop
7.2.1
51 HDN Inversion of operation hold (hold of 3-wire
operation)
Inversion of HD
*2: These functions are cannot be assigned to Always active function selection 1 to 3 (f104, f108, f110).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Toshiba TOSVERT VFS15-4037PL-W Specifications

General

Brand	Toshiba
Model	TOSVERT VFS15-4037PL-W
Category	Inverter
Language	English