184
2-4. Using other driving systems
4RUNNER_U_(L/O_0808)
Rear differential lock system (if equipped)
Using the rear differential lock system
Before using the rear differential lock system.
Stop the vehicle, shift the shift lever to N and turn the four-
wheel drive control switch to the L4 position to see if this is
sufficient. If this has no effect, additionally use the rear differ-
ential lock system.
Be sure to stop the wheels.
Press the RR DIFF LOCK switch.
After the rear differential is locked, the rear differential lock indicator
will come on.
The rear differential lock system is provided for use only when wheel
spinning occurs in a ditch or on a slippery or rugged surface.
The rear differential lock system is effective in case one of the rear
wheels is spinning.
Press the RR DIFF LOCK
switch to lock the rear differen-
tial.
At this time, the rear differential
lock indicator will blink. Wait a
few seconds for the system to
complete operation. After the
rear differential is locked, the
indicator will stop blinking and
remain on.
To unlock the rear differential,
push the switch again.
4RUNNER_U.book Page 184 Wednesday, July 30, 2008 3:00 PM
To Next Page
Loading...
Need help?
General
