Toyota 2009 Tundra User Manual

512
4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the engine switch off.
The fuses are located in the following places. To check the
fuses, follow the instructions below.
Engine compartment
Push the tab in and lift the lid
off.
Under the instrument panel
Remove the lid.
After a system failure, see “Fuse layout and amperage rat-
ings” (→P. 515) for details about which fuse to check.

Toyota 2009 Tundra Specifications

General

Brand	Toyota
Model	2009 Tundra
Category	Automobile
Language	English