The system sounds the alarm and flashes the lights when forced
entry is detected.
■ Triggering of the alarm
The alarm is triggered in the following situations:
● A locked door is unlocked or opened in any way other than
using the entry function, wireless remote control or mechani-
cal key with the alarm being set. (The doors will lock again
automatically.)
● The hood is opened with the alarm being set.
■ Setting the alarm system
Close the doors and hood,
and lock all the doors. The
system will be set automati-
cally after 30 seconds.
The indicator light changes
from being on to flashing when
the system is set.
■ Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarms:
● Unlock the doors.
● Start the engine. (The alarm will be deactivated or stopped
after a few seconds.)
To Next Page
Loading...
Need help?
General
