Toyota 2010 4RUNNER NAVIGATION SYSTEM User Manual

230
2-4. Using other driving systems
Active traction control system
∗
The active traction control system automatically helps prevent the
spinning of 4 wheels when the vehicle is started or accelerated on
slippery road surfaces.
■ System operation
Part-time 4WD models:
Stop the vehicle, shift the shift lever to N and shift the front-
wheel drive control lever into L4.
Full-time 4WD models:
Stop the vehicle, shift the shift lever to N and then push and
turn the four-wheel drive control switch to L4L.
Press the “A-TRAC” switch to
activate the system.
At this time, the “A-TRAC” indi-
cator will come on.
To c a n ce l th e sy s tem , p u s h t h e
switch again.
STEP 1
STEP 2
∗: If equipped

Toyota 2010 4RUNNER NAVIGATION SYSTEM Specifications

General

Brand	Toyota
Model	2010 4RUNNER NAVIGATION SYSTEM
Category	Automobile
Language	English