The system sounds the alarm and flashes lights when forcible entry
is detected.
■ Triggering the alarm
The alarm is triggered in the following situations.
● A locked door or trunk is unlocked or opened in any way other
than using the entry function, wireless remote door lock func-
tion or using the mechanical key. (The doors will lock again
automatically.)
● The hood is opened while the vehicle is locked.
● Vehicles with the glass breakage sensor: The side windows
are tapped or broken.
■ Setting the alarm system
Close the doors, trunk and
hood, and lock all doors. The
system will be set automati-
cally after 30 seconds.
The indicator light changes
from being on to flashing when
the system is set.
■ Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm.
● Unlock the doors or trunk.
● Start the engine. (The alarm will be deactivated or stopped
after a few seconds.)
To Next Page
Loading...
Need help?
General
