284
4-2. Driving procedures
running.
If the engine is stopped with the
shift lever in a position other than P,
the engine switch will not be turned
to OFF but instead be turned to
ACC. Perform the following proce-
dure to turn the switch to OFF:
1 Check that the parking brake is
set.
2 Shift the shift lever to P.
3 Check that “ACCESSORY” is
displayed on the multi-informa-
tion display and press the
engine switch shortly and firmly
once.
4 Check that “ACCESSORY” or
“IGNITION ON” on the multi-
information display is off.
■ To prevent battery discharge
● Do not leave the engine switch in
ACC or ON for long periods of time
without the engine running.
● If “ACCESSORY” or “IGNITION
ON” is displayed on the multi-infor-
mation display, the engine switch is
not in OFF. Exit the vehicle after
turning the engine switch to OFF.
When stopping the engine
with the shift lever in a posi-
tion other than P
■ To prevent battery discharge
Do not stop the engine when the shift
lever is in a position other than P. If
the engine is stopped in another shift
lever position, the engine switch will
not be turned to OFF but instead be
turned to ACC. If the vehicle is left in
ACC, battery discharge may occur.