290
4-2. Driving procedures
*1
: For GRH321L-EDFQH model
*3
*2
: Except for GRH321L-EDFQH
model
*3
*3
: The model code is indicated on the
manufacturer’s label or the Certifica-
tion Regulation label. (P.656)
■ Reverse warning buzzer
A buzzer will sound to alert the driver if
the shift lever is shifted to the R position.
iMT detects clutch pedal and shift
lever operations performed by the
driver. When the shift position is
changed, iMT judges the optimal
engine speed and performs the
appropriate control to help the
driver to change the shift position
smoothly.
Press the “iMT” switch.
The “iMT” indicator will illuminate in
green. Press the switch again to cancel
iMT.
■ Operation of iMT
● When the clutch pedal is depressed
and the shift lever is moved to a posi-
tion, iMT controls the engine speed to
be optimal for changing the shift posi-
tion. However, iMT stops operating
before the shift position is changed if
the clutch pedal is not released for a
while, and the engine speed cannot
4 170 (105)
5 170 (105)
■ To prevent damage to the trans-
mission
● Do not shift the shift lever to R with-
out depressing the clutch pedal.
● Do not lift up the ring section except
when shifting the lever to R.
● Shift the shift lever to R only when
the vehicle is stationary.
● Do not rest your hand on or hold the
shift lever any time other than when
shifting.
Shift position Maximum speed ● In order not to cause the engine to
over-rev, make sure to only shift
gears sequentially.
● Do not release the clutch pedal
suddenly, as doing so may cause
damage to the clutch or transmis-
sion.
iMT (Intelligent Manual
Transmission) (if equipped)
To Next Page
Loading...
Need help?
General
