636
8-2. Steps to take in an emergency
■ After using the tools and jack
Before driving, make sure all the tools
and jack are securely in place in their
storage location to reduce the possi-
bility of personal injury during a colli-
sion or sudden braking.
■ When loosening or tightening the
spare tire clamp bolt
Do not use an impact wrench. Use
the wheel nut wrench.
■ After taking out or stowing the
spare tire
Make sure to secure the tire holder by
tightening the clamp bolt to prevent
the holder from dropping or may hit
the under body of the vehicle during
driving.
■ When stowing the flat tire
● Ensure that there is no object
caught between the tire and the
vehicle underbody.
● Securely tighten the spare tire
clamp bolt to hold the tire holder by
the clamp.
■ When jacking up with the vehi-
cle-equipped jack
Do not attach the jack to the mount
hanger shown in the illustration. Oth-
erwise, the mount hanger may be
damaged.
■ When replacing the tires (vehi-
cles with tire pressure warning
system)
When removing or fitting the wheels,
tires or the tire pressure warning
valve and transmitter, contact your
Toyota dealer as the tire pressure
warning valve and transmitter may be
damaged if not handled correctly.
To Next Page
Loading...
Need help?
General
