DESTINATION INPUT AND ROUTE GUIDANCE
53
Screen configuration
You can choose any one of the screen
configurations.
1. Touch this switch to display the follow-
ing screen.
2. To select the desired screen configura-
tion, touch one of the following switches.
Depending on the conditions, it may not be
possible to select certain screen configura-
tion switches.
: To display single map screen. (See
page 53.)
: To display dual map screen. (See
page 54.)
: To display compass mode screen.
(See page 54.)
: To display turn list screen. (See page
55.)
: To display arrow screen. (See page
55.)
: To display freeway information
screen. (See page 55.)
: To display intersection guidance
screen or guidance screen on free-
way. (See page 56.)
(a) Single map
The screen shows the single map.