TP-Link Archer C20 User Manual

Archer C20
AC750 Wireless Dual Band Router
- 99 -
4.17 Bandwidth Control
Figure 4-91 Bandwidth Control
Choose menu “Bandwidth Control”, and then you can configure the bandwidth control in the
screen as shown in Figure 4-91 Bandwidth Control.
You can configure the Egress Bandwidth and Ingress Bandwidth in this page. Their values you
configure should be less than 100000Kbps. You can also view and configure the Bandwidth
Control rules in this page.
 Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take
effect.
 Egress Bandwidth - The upload speed through the Internet port.
 Ingress Bandwidth - The download speed through the Internet port.
Click Save to make the settings take effect.
 Description - This is the information about the rules such as address range.

Priority - The priority of the rule, ranging from 1 to 8. 1 stands for the highest priority
 Egress bandwidth - This field displays the max and mix upload bandwidth through the
Internet port, the default is 0.
 Ingress bandwidth - This field displays the max and mix download bandwidth through the
Internet port, the default is 0.
 Status - This displays the status of the rule.
 Edit - Click Edit to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.

TP-Link Archer C20 Specifications

General

Color	blue/white, blue
Wi-Fi Speed	0.733 gigabits per second
Band Technology	dual
Frequency Band	2.4 ghz, 5.0 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100
Ethernet Switch	yes
Wireless Networking Standard	wi-fi 5
Wireless Standard	ac, n
2.4 Ghz Streams	1
5.0 Ghz Streams	1
Antennas	3
Firewall	spi
Data Encryption	yes
Encryption Type	wpa, wpa2, wpa-psk, wpa2-psk
Ports	rj-45
LAN Ports	4
WAN Ports	1
Built In Modem	no

Weight and Dimensions

Height	1.4 inches
Width	9.1 inches