NC230 HD Day/Night Wi-Fi Cloud Camera
HD Day/Night Cloud Camera, 300Mbps Wi-FiNC25
0
27
Service Provider: Select one of the built-in DDNS servers from the drop-down list: No-IP
(www.noip.com
), DynDNS (www.dyn.com), and Comexe (www.comexe.cn).
Note:
If you have not registered for any of the listed DDNS servers, please select one and click Go to
register… and follow the instructions provided on the official website to register.
Username: Enter the username that is used to log into DDNS.
Password: Enter the password that is used to log into DDNS.
Domain Name: Enter the domain name that is applied to your camera and used to access
your camera.
Connection Status: Displays the current status of DDNS connection.
Click Login. After logging in successfully, click Save to save and enable the settings.
4.4.7 Advanced > Video
On this page, you can configure the video settings for your camera.
Coding Format: Displays the video coding format of the camera.
Resolution: Displays the video resolution of the camera. Higher resolution offers better
quality, but will require more bandwidth to stream.
Frame Rate: Select the frame rate to use for the video stream from the drop-down list. Higher
settings offer smoother video streams, but will require more bandwidth.
Mode: Displays the bit rate mode of the camera. This camera uses the VBR (variable bit rate)
mode. In this mode, the bit rate varies to keep consistent video quality. It allows a higher bit
rate (and therefore requires more bandwidth) to be allocated to dynamic scenes while less bit
rate to be allocated to static scenes.
To Next Page
Loading...
Need help?
General
