TP-Link tapo C310P2 User Manual

17
How to Reset Your Camera
Follow the steps below to reset your camera via the Reset button.
You can also go to Camera Settings in the Tapo app and tap Remove Device at the bottom to factory reset your camera.
1. Manually rotate the camera downwards. Loosen the screws on the
panel and remove the cover.
2. Press and hold the Reset button for at least 5 seconds until the LED
blinks red.
Reset Button

TP-Link tapo C310P2 Specifications

General

Brand	TP-Link
Model	tapo C310P2
Category	Security Camera
Language	English