TP-Link TL-SG108 User Manual

4
Chapter 2 Identifying External Components
This chapter describes the front panel and rear panel of the switch.
2.1 Front Panel
Figure 2-1 TL-SG108 Switch Front Panel
The following parts are located on the front panel:
 Ports (1-8): The TL-SG108 switch is equipped with 8 10/100/
1000Mbps Auto-Sensing RJ45 ports where you will connect your
network devices. The working status can be indicated by the
corresponding LEDs on the panel.
 Power LED: This indicator will light up when the switch powers on.
 LEDs: Each 10/100/1000Mbps Auto-Sensing RJ45 port has two
corresponding LEDs.
The LED on the left side of the RJ45 port will light solid green when a
1000Mbps device is connected to the port. It flashes green when data is
being transmitted or received on the working connection.
The LED on the right side will light solid yellow when a 10/100Mbps
device is connected to the port. It flashes yellow when data is being
transmitted or received on the working connection.
Note:
The LEDs’ description above explains the device’s working status after
initialization.

TP-Link TL-SG108 Specifications

General

Jumbo frames	16000
Forwarding rate	11.9 Mpps
MAC address table	4000 entries
Jumbo frames support	Yes
Packet buffer memory	1.5 MB
Maximum data transfer rate	2 Gbit/s
Supported data transfer rates	10/100/1000Mbps
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Packet transfer speed	14880pps/148800pps/1488000pps
Connectivity technology	Wired
Ethernet interface type	Gigabit Ethernet
Switch type	Unmanaged
Power connector	DC-in jack
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Switching protocols	CSMA/CD
Certification	CE, FCC, RoHS
Product color	Black
Rack mounting	-
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package depth	191 mm
Package width	130 mm
Package height	92 mm
Package weight	510 g
Power source	DC
Input current	0.6 A
Input voltage	9 V
Power consumption (max)	3.31 W
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	101 mm
Width	158 mm
Height	25 mm