TL-WA730RE 150Mbps Wireless N Range Extender User Guide
1.3 Main Features
Features Benefits
Make use of IEEE 802.11n wireless technology Allows your device to transmit wireless data at
the rate of up to 150Mbps
Provides multiple encryption security Types
including: 64/128/152-bit WEP WPA/WPA2
WPA-PSK/WPA2-PSK
Secures your data while the data packets are
being transmitted
Supports Built-in DHCP server Supports dynamic IP address distributing
Supports MAC address filtering Allows you to control the access rights of the
wireless stations, depending on the stations'
MAC addresses
Supports multiple operating modes including:
z Range Extender
Makes the AP an ideal solution for your wireless
local area network
Relays signal between its stations and the root
AP for greater wireless range
z Access Point Allows wireless stations to access and you can
create a wireless local area network.
Supports Firmware Upgrade You can easily upgrade the firmware to the
latest version through the web-based
management page
1.4 Appearance
1.4.1 The Front Panel
Figure 1-1
The front panel of the TL-WA730RE consists of several LED indicators, which is designed to
indicate connections. View from left to right, Table 1-1 describes the LEDs on the front panel of the
device.
LED Explanation
Name Status Indication
Off No Power
On Power on
Off The device has a system error
On
The device is initialising
Flashing
The device is working properly
3
To Next Page
General
Weight and Dimensions
