16
Chapter 3 Customize Your Network
3. 2. Configure Wireless Network
If you want to extend another host network after Quick Setup, you can refer to this
section. Moreover, you can change the wireless settings for your extended network.
Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
• To extend another host network:
1. Go to Wireless and locate the Connect to Host Network section.
2. Click WIRELESS SCANNER to find all available networks.
3. Select the host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
1. Move the extender closer to your router, and click Refresh in the top-right corner of the list.
2. You can manually enter the parameters of the network you want to extend, and click SAVE.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the Password
field.
5. Click SAVE .
• To change the wireless network name (SSID):
1. Go to Wireless and locate the Extended Network section.