How to factory reset TP-Link Repeater?
To restore your TP-Link Repeater to its factory default settings: Option One: While the extender is powered on, use a pin to press the RESET button until the LED turns off briefly, then release the button. Option Two: Log into the extender's web management page to restore factory settings.
General| Wi-Fi | Yes |
|---|---|
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Security algorithms | 64-bit WEP, 128-bit WEP, 152-bit WEP, WPA-PSK, WPA2-PSK |
| Wi-Fi data rate (max) | 300 Mbit/s |
| Type | Network repeater |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum transfer distance | - m |
| Windows operating systems supported | Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 2000, Windows 2000 Professional, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows 98SE, Windows NT, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Certification | CE, FCC |
| Product color | White |
| Housing material | Plastic |
| Ethernet LAN (RJ-45) ports | 1 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Sustainability certificates | RoHS |
| Antenna type | External |
| Antennas quantity | 2 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 3 W |
| Package type | Box |
| Package depth | 101.5 mm |
| Package width | 156.5 mm |
| Package height | 89 mm |
| Package weight | 200 g |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 34 mm |
|---|---|
| Width | 52 mm |
| Height | 65 mm |
Explains the conventions used in the guide for text formatting and symbols.
Provides links for downloading software, the Quick Installation Guide, and product specifications.
Introduces the TP-Link extender's purpose, functionality, and benefits.
Details the physical design and components of the extender.
Explains the meaning of different LED indicators on the extender.
Describes the function of each port and button on the extender.
Instructions on how to connect the extender to a power outlet.
Guidance on placing the extender for optimal Wi-Fi coverage.
Step-by-step guide to setting up the extender using the TP-Link Tether mobile app.
Instructions for setting up the extender using the WPS button on your router.
Guide to connecting via Ethernet or Wi-Fi and using a web browser for setup.
View the internet status to verify successful network setup.
Extend another network or modify existing wireless settings.
Learn how to hide the extended network's SSID from network scans.
Modify the extender's IP address, subnet mask, and gateway.
Configure the range of the extender's Wi-Fi signal.
Permit or block specific devices from accessing the network.
Instructions on adding devices to the blacklist to restrict their access.
Instructions on adding devices to the whitelist to grant them access.
Connect wired-only devices to your wireless network using the extender.
Configure the extender as an Access Point.
Set the extender's system time for time-based functions.
Configure daylight saving time synchronization for system time.
Manage the extender's LED indicators, including Night Mode.
Schedule times for the extender to automatically turn off.
Update the extender's firmware for new features and improvements.
Save or load extender configuration settings.
Restore the extender to its original factory settings.
Restart the extender to improve performance or clear cache.
Schedule automatic reboot times for the extender.
Modify the password for accessing the extender's web management page.
View and save system activity logs for troubleshooting.
Procedure for resetting the extender to its default factory settings.
Steps to take if the login password is forgotten.
Information on how to retrieve the wireless password.
Troubleshooting steps for accessing the extender's web interface.
How to configure the extender with router MAC filtering enabled.
Statement of compliance with EU directives.
Details on meeting EU public exposure limits for electromagnetic fields.
Compliance information for Canadian regulations.
Information on IC radiation exposure limits.
Industry Canada compliance statement for radio apparatus.
Warning statements for Korean regulations regarding radio frequency interference.
Notices and warnings related to NCC and BSMI regulations.
General safety advice for product usage and maintenance.
General safety precautions for operating the device.
To Next Page
