14 Packaged Heat Pump • WC-IOM-7
General Information
The manufacturer will not assume any responsibility for equipment damage
resulting from condensate accumulation on the unit’s electrical and/or
mechanical components.
Unit Clearances
Figure 1 illustrates the minimum operating and service clearances for either a
single or multiple unit installation. These clearances are the minimum distances
necessary to assure adequate serviceability, cataloged unit capacity, and peak
operating efficiency.
Providing less than the recommended clearances may result in condenser coil
starvation, “short-circuiting” of exhaust and economizer airflows, or recirculation
of hot condenser air.
To Next Page
Loading...
Need help?
General
