BEFORE YOU START
5
4
The Choice of Power Supply
1.Battery powered mode:
6VDC 4*AAA alkaline batteries
2.AC adaptor powered mode:
100-240V~, 50-60HZ,400mA
(Can be supplied by AC adaptor model
UE08WCP-060100SPA only!)
Please unplug the adaptor to depart from
the using utility power.
Installing and Replacing the Batteries
Note:
The adaptor interface is located on the right side of the monitor. Place NO obstacles
on the right side for easy pull-off adaptro.
In order to achieve the best performance and protect you monitor,
please use the authorized / specified battery and power adaptor.
CAUTION
1. Open the battery door.
2. Insert the batteries according to the polarity
indications.
3. Close the battery door.
Battery Life: Approx. 44 days
(Battery capacity: 600 mAH. If measured three times per day, each measurement takes 35s,
measuring result display takes 20s and data transmission takes 10s. The current for measurement is
400 mA and that for records display and data transmission is 50 mA and 50 mA separately, while the
current when shutdown is 35 uA.
Replace the batteries under following circumstances:
displays on the LCD.
The LCD display dims.
When powering on the monitor, the LCD doesn’t light up.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
CAUTION
Install App and Pair-Up
1.Lifesense App is now available in App Store
You may search “lifesense”, then download and install the app in
your iPhone. Simple and convenient!
Bluetooth Module No.: NRF8001
RF Frequency Range: 2402 MHz to 2480 MHz
Output Power Range: 0 dBm
Supply Voltage: 3.3 V
Transmitting Distance: 10 meters
With the advanced Bluetooth 4.0 technology applied, the mobile or
portable equipments, which are equipped with Bluetooth function in
line with BLE Technical Specifications as well as BLP Protocol
established by global organization Bluetooth SIG, are capable to
receive your personal health data.
Just simply install the specially-designed app “Lifesense” and pair
up you scale with your mobile or portable equipments. Then you may
enjoy the comprehensive health solution provided by Transtek.
2.Turn on Bluetooth and Lifesense App. Make sure both are ON
when pair-up is proceeding.
3.Press and hold “User 2” button to start pair-up. Symbol and
symbol will be shown on the LCD alternatively, indicating
Pair-up is proceeding.
If SUCCEED, symbol will be
shown on the LCD.
If FAIL, symbol will shown on
the LCD.
BEFORE YOU START
AC adaptor
To Next Page
Loading...
Need help?
General
