Setting Date, Time and Measurement Unit
It is important to set the clock before using your blood pressure monitor,
so that a time stamp can be assigned to each record that is stored in the
memory. (The setting range of the year :2014—2054 time format:12 H)
1.When the monitor is off,
hold pressing “SET” button
for 3 seconds to enter the
mode for year setting.
Or when the monitor is off,
press “SET” button shortly,
it will display the time. Then
hold pressing “SET” button
to enter the mode for year
setting.
2.Press “MEM” button to
to change the [YEAR].
Each press will increase
the numeral by one in a
cycling manner.
3.When you get the right
year, press “SET” button
to set down and turn to
next step.
4.Repeat steps 2 and 3 to set
the [MONTH] and [DAY].
5.Repeat steps 2 and 3 to set the [HOUR]
and [MINUTE].
7.After the unit is set,the LCD will display
“dONE”first,then display all the settings you
have done and then it will turn off.
6.Repeat steps 2 and 3 to set the [UNIT].
1110
BEFORE YOU START BEFORE YOU START
To Next Page
Loading...
Need help?
General
