1.When the monitor is off,
press “START/STOP” button to turn on
the monitor, and it will finish the whole
measurement .
Adjust the zero. LCD display
Inflating and measuring.
Display and save the results.
Start the Measurement
2.Press “START/STOP” button to power
off, otherwise it will turn off
within 1 minute.
START
STOP
START
STOP
Recall the Records
1. When the monitor is off,
please press “MEM” button to
show the average value of
the latest three records.
2. Press “MEM” button
or “SET” button to get the
record you want.
The most recent record (1) is shown first. Each new measurement is assigned to the
first (1) record. All other records are pushed back one digit (e.g., 2 becomes 3, and
so on), and the last record (60) is dropped
The current No. is No 2. The corresponding
time is A.M. 8:18.
The corresponding
date is January 1st.
CAUTION
DOWN
UP
The date and time
of the record
will be shown
alternately.
Note: If you want to check another user’s records, please turn off the blood pressure monitor
when it is in the memory mode, then follow the steps of Select the User to select the user.
Then press “ MEM ” button to check the measurement records.
3.During the process of displaying the results, if there is no operation, the monitor
will turn off in one minute. Or you can press “START/STOP” button to turn it off.
1514
MEASUREMENT DATA MANAGEMENT
To Next Page
Loading...
Need help?
General
