75
Maintenance and Adjustment
Suggested Suspension Settings
Rear adjuster settings are counted from one
with position one being with the adjuster
turned fully anti-clockwise. There are five
adjuster positions in total. Position one gives
the minimum amount of spring pre-load.
Note:
• The details given in the table are
to be used as a guide only where
the rider and passenger each
weigh 90 kg or less. Setting
requirements should be increased
for heavier riders and passengers
according to personal preferences.
Tyres
Typical Tyre Marking
Typical Wheel Marking
Both models are equipped with tubeless
tyres, valves and wheel rims. Use only tyres
marked 'TUBELESS' and tubeless valves on
rims marked 'SUITABLE FOR TUBELESS
TYRES'.
Loading
Condition
Rear Adjuster
Position
Solo Riding - Softer 1
Solo Riding -
Standard
2
Solo Riding -
Firmer
3
Rider and
Passenger
5
To Next Page
Loading...
Need help?
General
