Triumph Rocket III User Manual

32
General Information
Windscreen
Note:
• The windscreen fitted to this
motorcycle can be removed
without the use of tools.
To remove the windscreen
1. Upper mounting
2. Lock handle
3. Lock
4. Lower mounting
5. Windscreen
To remove the windscreen, stand astride the
front wheel. Pull the lock handles towards the
windscreen to release the locks from the
upper mountings. For complete removal
from the motorcycle, lift the windscreen up
until it is released from the upper and lower
mountings.
To install the windscreen
To install the windscreen, carefully slide the
lower part of the windscreen behind the
indicators. Align the windscreen mounting
slots to the upper and lower mounting points
on the forks.
Note:
• Audible clicks can be heard when
the locks are engaged.
Slide the windscreen down until the upper
mounting locks have clicked into the locked
position.
Ensure both upper mount locks are locked
and the windscreen is secure.
4
3
2
1
cenp
5
Warning
To prevent detachment of the windscreen
during riding, after fitting, always grasp the
windscreen and pull firmly upwards. If the
windscreen locks are not correctly secured
the windscreen will detach from the locks.
A loose or detached windscreen could
cause loss of motorcycle control and an
accident.
Warning
After fitting or removing the windscreen,
operate the motorcycle in a safe area free
from traffic to gain familiarity with the new
handling characteristics. Operation when
not familiar with the new characteristics of
the motorcycle may result in loss of control
and an accident.

Triumph Rocket III Specifications

General

Brand	Triumph
Model	Rocket III
Category	Motorcycle
Language	English