73
Maintenance and Adjustment
Front Suspension
Front Fork Inspection
Examine each fork for any sign of damage,
scratching of the slider surface, or for oil
leaks.
If any damage or leakage is found, consult an
authorised Triumph dealer.
To check that the forks operate smoothly:
• Position the motorcycle on level
ground.
• While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
• If roughness or excessive stiffness is
detected, consult your authorised
Triumph dealer.
Suspension Adjustment
Front Suspension
The front suspension is factory set and is not
adjustable.
Rear Suspension
1. Rear suspension unit
2. Adjustment tool
The rear suspension is adjustable for pre-load
only.
To change the rear suspension spring
pre-load setting, remove the panniers (see
page 33).
Insert the adjustment tool supplied in the tool
kit into the hole provided in the adjuster ring.
Turn the adjuster ring clockwise to increase
spring pre-load, and anti-clockwise to
Warning
Riding the motorcycle with defective or
damaged suspension is dangerous and
may lead to loss of control and an accident.
cenf
Warning
Never attempt to dismantle any part of the
suspension units, as all units contain
pressurised oil. Skin and eye damage can
result from contact with the pressurised oil.
ceoi
1
2
To Next Page
Loading...
Need help?
General
