Triumph Speed Twin User Manual

MAINTENANCE AND ADJUSTMENT
133
Warning
Tire pressures which have been
reduced for off-road riding will impair
on-road stability.
Always make sure that the tire
pressures are set as described in the
Specification section for on-road use.
Operation of the motorcycle with
incorrect tire pressures may cause
loss of motorcycle control and an
accident.
Correct inflation pressure will provide
maximum stability, rider comfort and
tire life. Always check tire pressures
before riding when the tires are cold.
Check tire pressures daily and adjust if
necessary. See the Specification section
for details of the correct inflation
pressures.
Tire Pressure Monitoring System
(TPMS) (if equipped)
Caution
An adhesive label is installed to the
wheel rim to indicate the position of
the tire pressure sensor.
Care must be taken when replacing
the tires to prevent any damage to
the tire pressure sensors.
Always have the tires mounted by
an authorized Triumph dealer. It is
important to inform them that tire
pressure sensors are installed on the
wheels before they remove the tires.
Caution
Do not use anti puncture fluid or any
other item likely to obstruct air flow
to the TPMS sensor’s orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage caused by the use of
anti-puncture fluid or incorrect
maintenance is not considered a
manufacturing defect and will not be
covered under warranty.
Always have the tires mounted by
an authorized Triumph dealer. It is
important to inform them that tire
pressure sensors are installed on the
wheels before they remove the tires.
The tire pressures shown on your
instruments indicate the actual tire
pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tire pressures when
the tires are cold using an accurate
pressure gage. Do not use the tire
pressure display on the instruments.

Triumph Speed Twin Specifications

General

Brand	Triumph
Model	Speed Twin
Category	Motorcycle
Language	English