MAINTENANCE AND ADJUSTMENT
98
Operation description
Odometer Reading in Miles (km) or Time Period, whichever comes first
First
Service
Annual
Service
Mileage Based Service
Daily
1st Annual
Service
Ye a r
10,000 and
30,000 Mile
(16,000 and
48,000 Km)
Service
20,000 Mile
(32,000 Km)
Service
40,000 Mile
(64,000 Km)
Service
Steering and Suspension
Steering - check for free operation • • • • • •
Front and rear suspension - check for damage/
leaks/smooth operation
• • • • • •
Headstock bearings - check/adjust - except first
service
• • • • •
Steering head bearings - lubricate • •
Fork oil - replace •
Brakes
Brake system - check operation •
Brake pads - check wear levels* • • • • • •
Brake fluid levels - check • • • • • •
Brake master cylinders - check for fluid leaks • • • • •
Brake calipers - check for fluid leaks and seized
pistons*
• • • • •
Brake fluid - replace - every 2 years, regardless of
mileage*
•
Final Drive
Drive chain slack - check/adjust • • • • • •
Drive chain rubbing strip - check for wear, cracks
or damage*
• • • • • •
Drive chain - wear check* • • • • •
Drive chain - lubricate • • • • •
Electrical
Lights, instruments and electrical systems - check/
adjust
• • • • • •
General
Bank angle indicators - check for wear* • • • • • •
Center and/or side stand - check for wear/smooth
operation
• • • • • •
Autoscan - carry out a full Autoscan using the
Triumph diagnostic tool (print a customer copy)
• • • • •
Instruments and engine ECM - check for latest
calibration download using the Triumph diagnostic
tool
• • • • •
Fasteners - inspect visually for security • • • • •
Carry out all outstanding Service Bulletin and
warranty work
• • • • •
Carry out road test • • • • •
Complete the service record book and reset the
service indicator (if equipped)
• • • • •
Center stand flanged sleeves (if equipped) - clean/
grease
• • •
Side stand pivot pin - clean/grease • • •