80
Maintenance and Adjustment
Note:
• On models fitted with ABS, a
special tool is required to bleed
the braking system. Contact your
authorised Triumph dealer when
the brake fluid needs renewing or
the hydraulic system requires
maintenance.
Brake Fluid Level Inspection and
Adjustment
1. Front brake fluid reservoir, upper
level line
2. Lower level line
3. Safety clip
The brake fluid level in the reservoirs must be
kept between the upper and lower level lines
(reservoir held horizontal).
Remove the safety clip (front only).
Remove the reservoir cover.
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
Refit the reservoir cover ensuring that the
diaphragm seal is correctly fitted.
Refit the safety clip.
Warning
If the ABS is not functioning, the brake
system will continue to function as a
standard non ABS braking system. In this
situation braking too hard will cause the
wheels to lock resulting in loss of control
and an accident.
Reduce speed and do not continue to ride
for longer than is necessary with the
indicator light illuminated. Contact an
authorised Triumph dealer as soon as
possible to have the fault checked and
rectified.
Warning
Failure to observe and act upon any of
these items may cause a dangerous riding
condition leading to loss of control and an
accident.
jajc
3
1
2
To Next Page
Loading...
Need help?
General
