98
Maintenance and Adjustment
Headlight Bulb Replacement
It is not necessary to remove the headlight
when bulb replacement becomes necessary.
To replace a bulb:
Right Hand Side
1. Headlight unit
2. Bulb and bulb retainer
3. Multi-plug
Remove the seat.
Disconnect the battery, negative (black) lead
first.
Remove the four screws and remove the
right hand bulb cover.
Disconnect the multi-plug from the bulb
retainer.
Remove the bulb and bulb retainer from the
headlight assembly by rotating it clockwise.
Installation is the reverse of the removal
procedure.
Left Hand Side
1. Headlight unit
2. Bulb
3. Multi-plug
4. Wire retainer
Disconnect the battery, negative (black) lead
first.
Remove the four screws and remove the left
hand bulb cover.
Disconnect the multi-plug from the bulb.
Detach the wire retainer from its clip (do not
remove the screw) then remove the bulb
from the headlight unit.
Installation is the reverse of the removal
procedure.
Warning
The bulbs become hot during use. Always
allow sufficient time for the bulb to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before reuse.
1
2
3
cedh
1
2
3
4
cedi
To Next Page
Loading...
Need help?
General
