Troy-Bilt TB635 EC User Manual

45
El cabezal de corte tiene césped atascado Pare el motor y limpie el cabezal de corte
El cabezal de corte está desalineado Recargue hilo nuevo en el cabezal de corte
El carretel interior se traba Rebobine el hilo
El cabezal de corte está sucio Limpie el carrete interior y la bobina exterior
El hilo está soldado Abra el cabezal de corte y extraiga la sección que se haya soldado
El hilo está torcido Rebobine el hilo
No se extiende hilo suficiente
Pare la unidad, oprima la perilla de impacto y tire del hilo hasta que
salgan 4 pulgadas (102 mm) fuera del cabezal de corte
Hay aceite, producto de limpieza o lubricante en el cabezal de corte Limpie y seque completamente el cabezal de corte
El depósito de combustible está vacío Llene el depósito de combustible con combustible nuevo
El bulbo del cebador no se presionó lo suficiente Oprima el bulbo del cebador 10 veces
El combustible está viejo (más de 30 días) Drene el depósito de combustible y agregue combustible nuevo
La bujía está averiada Vuelva a colocar la bujía
SOLUCIÓN DE PROBLEMAS
El combustible está viejo (más de 30 días) Drene el depósito de combustible y agregue combustible nuevo
El cabezal de corte tiene césped atascado Pare el motor y limpie el cabezal de corte
El filtro de aire está sucio Limpie o reemplace el filtro de aire
PROBLEMA SOLUCIÓN
El filtro de aire está sucio Limpie o reemplace el filtro de aire
El combustible está viejo (más de 30 días) Drene el depósito de combustible y agregue combustible nuevo
La velocidad de ralentí es incorrecta Ajuste la velocidad de ralentí
El combustible está viejo (más de 30 días) Drene el depósito de combustible y agregue combustible nuevo
El filtro de aire está sucio Limpie o reemplace el filtro de aire
La bujía está averiada Vuelva a colocar la bujía
EL MOTOR NO ARRANCA
EL MOTOR NO FUNCIONA AL RALENTÍ
EL MOTOR NO ACELERA
AL MOTOR LE FALTA POTENCIA O SE PARA
EL CABEZAL DE CORTE NO HACE AVANZAR EL HILO
EL HILO DE CORTE AVANZA SIN CONTROL
Si necesita asistencia adicional, comuníquese con un centro de servicio autorizado.

Troy-Bilt TB635 EC Specifications

General

Brand	Troy-Bilt
Model	TB635 EC
Category	Trimmer
Language	English

Summary

Service Information

Safety Guidelines

Safety Symbols and Meanings

Explains danger, warning, caution, and note symbols used in the manual.

Spark Arrestor Note

Information regarding spark arrestors for specific regions and fire prevention.

Important Safety Instructions

Safety Warnings for Gas Units

Critical safety precautions for operating gasoline-powered units.

While Operating

Essential safety guidelines to follow during unit operation.

Other Safety Warnings

Maintenance Safety

Safety precautions to take during unit maintenance procedures.

Storage and Handling Safety

Guidelines for safely storing and handling the unit.

Safety and International Symbols

General Safety Symbols

Explains common safety symbols for operation, protection, and warnings.

Fuel and Oil Symbols

Describes symbols related to fuel requirements and oil specifications.

Control and Warning Symbols

Details symbols for unit controls and critical hazard warnings.

Know Your Unit

Applications

Describes the various uses and tasks the trimmer can perform.

Assembly Tools Required

Lists the tools needed for assembling the unit.

Specifications

Details the technical specifications of the trimmer unit.

Assembly

Installing the Cutting Head Shield

Step-by-step instructions for attaching the cutting head shield.

Installing and Adjusting the Handle

Guide on how to attach and position the unit's handle.

Installing and Removing Attachments

Installing the Attachment

Instructions for securely attaching optional accessories to the coupler.

Removing the Attachment

Procedure for safely detaching accessories from the unit's coupler.

Oil and Fuel

Using the Right Oil

Guidance on selecting and using the correct type of oil.

Adding Oil: Initial Use

Instructions for adding oil to the crankcase before the first use.

Using the Right Fuel

Definition of Blended Fuels

Explains the composition of blended fuels and their properties.

Using Blended Fuels

Recommendations for using fuels blended with ethanol or other additives.

Using Fuel Additives

Instructions for adding fuel stabilizers to prevent corrosion and gumming.

Fueling the Unit

Step-by-step guide for safely adding fuel to the unit's tank.

Starting and Stopping

Starting Instructions

Detailed steps for starting the engine safely and correctly.

Stopping Instructions

Procedure for shutting down the engine and unit.

Using the Electric Start Accessory

Starting Instructions (Electric Start)

Steps for starting the unit using the optional electric start accessory.

Stopping Instructions (Electric Start)

Procedure for stopping the unit when using the electric start accessory.

Operation

Holding the Unit

Proper techniques for holding and positioning the unit during use.

Adjusting the Trimming Line Length

Method for releasing more trimming line while operating the unit.

Tips for Best Results

Advice and techniques for optimal trimming performance.

Decorative Trimming

Edging

Rotating the Trimmer Attachment

Procedure to rotate the trimmer attachment for edging tasks.

Maintaining the Trimming Line

Tips for maintaining line length on hard surfaces to prevent wear.

Maintenance

Maintenance Schedule

Required maintenance procedures and their recommended frequencies.

Replacing the Trimming Line

Instructions for installing new trimming line into the cutting head.

Removing Old Trimming Line and Obstructions

Checking the Oil Level

Changing the Oil

Maintaining the Air Filter

Adjusting the Idle Speed

Maintaining the Spark Plug

Cleaning and Storage

Cleaning

Guidelines for cleaning the exterior of the unit.

Storage Guidelines

Instructions for storing the unit for short-term and long-term periods.

Preparing for Use after Long-term Storage

Steps to take to get the unit ready for operation after long storage.

Troubleshooting

The Engine Will Not Start

Solutions for common problems preventing the engine from starting.

The Engine Will Not Idle

Troubleshooting steps for when the engine fails to idle properly.

The Engine Will Not Accelerate

Solutions for issues preventing the engine from accelerating.

The Engine Lacks Power or Stalls

Diagnosis and fixes for a loss of power or the engine stalling.

The Cutting Head Will Not Advance Line

Troubleshooting steps for when the trimmer line does not feed out.

The Cutting Line Advances Uncontrollably

Solutions for when the trimmer line feeds out excessively.

Manufacturer's Limited Warranty

How to Obtain Service

Instructions on how to get warranty service and locate authorized dealers.

Warranty Exclusions

Lists items and conditions not covered by the limited warranty.

State Law Relates to Warranty

Explains how state laws affect the warranty and consumer rights.