29
TRUE
traditional reach-ins
www.truemfg.com
Remove the lampshield to reveal the
bulb. Squeeze the sides of the lamp-
shield at the same time pulling it away
from the bulb.
3
The lamp holders are spring activated. Pull
the top lamp holder up and push the bulb
down at the same time. This will leave
enough clearance to remove the bulb.
4
LIGHT BULB REPLACEMENT (IDL) INTEGRATED
DOOR LIGHTING
WARNING: When replacing a light bulb make sure power to the
unit is either turned off or unplugged.
IDL (INTEGRATED DOOR LIGHTING):
• Squeeze the plastic lampshield together and pull away from the
door (See Image 3).
• Push the bulb down while pulling the spring activated lampholder
up. This will give you enough clearance to take the bulb out
(See Image 4).
GENERAL MAINTENANCE
LIGHT BULB REPLACEMENT (INTERIOR LIGHTS)
GENERAL MAINTENANCE
WARNING: When replacing a light bulb make sure power to the
unit is either turned off or unplugged.
Be careful when removing the light bulb. Please be aware of your local
ordinances in disposing old bulbs. These bulbs should be disposed in
a safe and correct manner.
• Simply unscrew the light bulb (See image 1 & 2).
FOR ADDITIONAL MAINTENANCE INSTRUCTION,
PLEASE VISIT THE MEDIA CENTER AT
WWW.TRUEMFG.COM
1
Interior Light
2
Interior Light
To Next Page
Loading...
Need help?
General
