TSC MB240 Series User Manual

- 5 -
1.4 Print Specifications
Print Specifications
203 dpi models
300 dpi models
Print head resolution
(dots per inch/mm)
203 dots/inch
(8 dots/mm)
300 dots/inch
(12 dots/mm)
Printing method
Thermal transfer and direct thermal
Dot size
(width x length)
0.125 x 0.125 mm
(1 mm = 8 dots)
0.084 x 0.084 mm
(1 mm = 12 dots)
Print speed
(inches per second)
2,3,…8 ips
Up to 8 ips
2,3,…6 ips
Up to 6 ips
Max. print width
108 mm (4.25”)
105.7 mm (4.16”)
Max. print length
1000” (25,400 mm)
450” (11,430 mm)
Printout bias
Vertical: ~Max. 1 mm. Horizontal: Max. 1 mm
1.5 Ribbon Specifications
Ribbon Specifications
Ribbon outside diameter
Max. 81.3 mm O.D.
Ribbon capacity
450 meter long
Ribbon core
1” (25.4 mm)
Ribbon width
40 mm ~ 110 mm (0.157” ~ 4.33”)
Ribbon wound type
Ink coated outside wound, ink coated inside wound
Note: It is recommended to use the ribbon width longer than label width.
1.6 Media Specifications
Media Specifications
Media roll
capacity
Max. 8” (203.2 mm) O.D.
Media core
diameter
1”~ 3” (25.4 mm ~ 76.2 mm) I.D. core
Media type
Continuous, die-cut, black mark, fan-fold, notch
Media wound type
Outside wound
Media width
20 mm ~ 120 mm (0.79” ~ 4.72”) (Cutter mode: max. 114 mm)
Media thickness
0.06 mm ~ 0.28 mm
Label length
 5 mm ~ 25,400 mm (203 dpi series)
 5 mm ~ 11,430 mm (300 dpi series)
Label length
(peeler mode)
25.4mm ~ 152.4mm (1” ~ 6”)
Label length
(cutter mode)
 25.4~2,286 mm (1” ~ 90”) ----- 203dpi
 25.4~1016 mm (1” ~ 40”) ------ 300dpi
Black mark
Min. 8 mm (W) x Min. 2 mm (H)
Gap height
Min. 2 mm

TSC MB240 Series Specifications

General

Brand	TSC
Model	MB240 Series
Category	Printer
Language	English