TSC MB240 Series User Manual

- 26 -
3.4.4 Loading Media in Cutter Mode (Option)
1. Open the printer right side cover.
2. Please refer to section 3.4.1 for loading
media.
3. Using the front display panel to do the
calibration and set the printer mode to
cutter mode.
4. Push the Print head release lever to open
print head mechanism. Lead the media
through the cutter paper opening.
5. Close the print head mechanism and
press the FEED button to test.

TSC MB240 Series Specifications

General

Brand	TSC
Model	MB240 Series
Category	Printer
Language	English