TSC MH341 Series User Manual

- 16 -
3. Setup
3.1 Setting up the printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug
the power cord into a properly grounded power outlet.
Note: Please switch OFF printer power switch prior to plug in the power cord to printer
power jack.
MH241 Series
MH241T Series
MH241P Series

TSC MH341 Series Specifications

General

Brand	TSC
Model	MH341 Series
Category	Printer
Language	English