- 32 -
4.3 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles
This printer has been fully tested before delivery. There should be no ribbon
wrinkle presented on the media for general-purpose printing application. Ribbon
wrinkle is related to the media width, thickness, print head pressure balance,
ribbon film characteristics, print darkness setting…etc. In case the ribbon wrinkle
happens, please follow the instructions below to adjust the printer parts.
Ribbon Tension Adjustment Knob has 5 positions for adjustment. Use flat blade
driver to change the ribbon tension position.
The Print Head Pressure Adjustment Knob has 5 levels of settings. Switch the
Print head Pressure Adjustment Knob and cooperate with the Print Head
Pressure Position Adjustment Knob to adjust the pressure and position on print
head.
Ribbon Tension Adjustment Knob
Print head pressure
position adjustment knob
Print head pressure
adjustment knob
Print Head Pressure Adjustment Knob
To Next Page
Loading...
Need help?
General
