EasyManuals Logo
Home>TSC>Printer>MH341 Series

TSC MH341 Series User Manual

TSC MH341 Series
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
iii
KN 32
KN 35
K60950-1(2011-12)
기기는 업무용(A ) 전자파적합기기로서 판매 또는 사용자는 점을
주의하시기 라며, 가정외의 지역에서 사용하는 것을 목적으로 합니.
GB 4943.1
GB/T9254, Class A
GB 17625.1
此为 A 级产品,在生活环境中,该产品可能会造成无线电干扰,
在这种情况下,可能需要用户对干扰采取切实可行的措施。
Energy Star for Imaging Equipment Version 3.0
IS 13252(Part 1)/
IEC 60950-1
Note: There may have certification differences in the series models, please refer to product label for
accuracy.
Important safety instructions:
1. Read all of these instructions and keep them for later use.
2. Follow all warnings and instructions on the product.
3. Disconnect the power from the AC inlet before cleaning or if fault happened.
Do not use liquid or aerosol cleaners. Using a damp cloth is suitable for cleaning.
4. The mains socket shall be installed near the equipment and easily accessible.
5. The unit must be protected against moisture.
6. Ensure the stability when installing the device, Tipping or dropping could cause damage.
7. Make sure to follow the correct power rating and power type indicated on marking label
provided by manufacture.
8. Please refer to user manual for maximum operation ambient temperature.
provided by manufacture.
WARNING:
Moving parts. Keep finger or body away from moving parts.
CAUTION:
(For equipment with RTC (CR2032) battery or rechargeable battery pack)
Risk of explosion if battery is replaced by an incorrect type.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC MH341 Series and is the answer not in the manual?

TSC MH341 Series Specifications

General IconGeneral
BrandTSC
ModelMH341 Series
CategoryPrinter
LanguageEnglish

Related product manuals