TSC Printronix MB240 Series User Manual

23
3.7 Loading the Linerless Media (Optional)
Follow the steps below to load the linerless media for the printer:
NOTE: The images below show a printer shipped with a cutter module. The same steps also apply to a printer shipped with a tear-off module.
1. Open the media cover. For how to open the media cover,
please refer to 3.3 Loading the Media.
2. Load the linerless media onto the media hanger. For how to
load the linerless media onto the media hanger, please refer
to 3.3 Loading the Media.
3. Rotate the printhead release lever to open the printhead.
4. Push the cutter release latch in the indicated direction to
open the cutter.

TSC Printronix MB240 Series Specifications

General

Type	Industrial Barcode Printer
Resolution	203 dpi (8 dots/mm)
Media Type	Direct Thermal, Thermal Transfer
Communication Interface	USB, Serial, Ethernet
Interface	USB 2.0, RS-232, Parallel, Ethernet 10/100
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Codabar, PDF417, QR Code, Data Matrix
Scanning Method	Thermal Transfer/Direct Thermal
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)