TSC Printronix MB240 Series User Manual

49
Media Power Up
Set the action of the media when turning on the printer.
Feed: Printer will advance one label.
Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
No Motion
Head Close
Set the action of the media when closing the printhead.
Feed: Printer will advance one label.
Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
No Motion
Label Top
Adjust print position vertically on the label. Value range: -120 to +120 dots.
0
Left Position
Adjust print position horizontally on the label. Value range:-9999 to +9999 dots.
0
Reprint Mode
Reprint the last label by pressing button on printer’s control panel.
Disabled
Format Convert
Select the bitmap scaling factor. The first number is the original dots per inch (dpi) value; the
second the dpi which you would like to scale.
None

TSC Printronix MB240 Series Specifications

General

Brand	TSC
Model	Printronix MB240 Series
Category	Barcode Reader
Language	English