TSC TE200 series Service Manual

18
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
4. Remove the three screws on lower
print engine right side cover as
indicated and open it.
Cable of gap sensor emitter
(black with red)
5. Remove/replace the gap sensor
emitter.
6. Reassemble the parts in the
reverse procedure.
Gap sensor (transmitter)
Cable of gap sensor (transmitter)
Screws

TSC TE200 series Specifications

General

Brand	TSC
Model	TE200 series
Category	Printer
Language	English