TSC TE200 series Service Manual

19
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
3.5 Replacing the Black-mark Sensor Module
1. Please refer to the section 3.3 to
remove the stepping motor module.
2. Open the Mylar film cover and
remove the screw on the black-mark
sensor module.
3. Remove/replace the black-mark
sensor module.
Mylar film
Black-mark sensor

TSC TE200 series Specifications

General

Brand	TSC
Model	TE200 series
Category	Printer
Language	English