26
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
3.9 Installing the Peeler Module (TE210/TE310 Series option)
1. Open the printer top cover by
pressing the top cover open
tabs located on each side of the
printer.
2. Push the print head release
button to open the print head
mechanism and remove the
lower front panel.
3. Insert the cable of peeler
module through the hole as
indicated to the main board.
4. Remove the four screws on
media holder and disengage it.
To Next Page
Loading...
Need help?
General
