TSC TTP-2410MT Series User Manual

- 60 -
6.3.2 Sensor
This option is used to calibrate the selected sensor. We recommend calibrate the sensor
before printing when changing the media.
Item
Description
Default
Status
This function is available to check the printer’s sensor status.
N/A
Gap Mode
This item is used to set the gap media sensor type and
calibrate the sensor.
N/A
Bline Mode
This item is used to set the black mark media sensor type and
calibrate the sensor.
N/A
Cont. Mode
This item is used to set the continuous media sensor type and
calibrate the sensor.
N/A
Automatic
Printer will feed 2 to 3 gap labels to calibrate the sensor
sensitivity automatically.
N/A
Manual
In case “Automatic” cannot apply to the media, please use
“Manual” function to set the paper length and gap/bline size
then scan the backing/mark to calibrate the sensor sensitivity.
N/A
Pre-Printed
This function can set the min. paper length and max gap/bline
length before auto-calibrate the sensor sensitivity.
N/A
Main
Menu
Setup Sensor
Status
Calibration
Gap Mode
Automatic
Manual
Pre-Printed
Bline Mode
Automatic
Manual
Pre-Printed
Cont. Mode
Automatic
Manual

TSC TTP-2410MT Series Specifications

General

Brand	TSC
Model	TTP-2410MT Series
Category	Barcode Reader
Language	English