TSC TTP-243 Series Programming Manual

TSC AUTO ID Technology Co., Ltd. 1 Copyright 2009 All Rights Reserved.
Setup and System Commands
 SIZE
Description
This command defines the label width and length.
Syntax
English system (inch)
SIZE m,n
Metric system (mm)
SIZE m mm,n mm
Dot measurement
SIZE m dot,n dot
This command is only supported in v6.27 and later firmware.
Parameter Description
m Label width (inch or mm)
n Label length (inch or mm)
Note :
200 DPI : 1 mm = 8 dots
300 DPI : 1mm = 12 dots
For metric and dot systems, there must be a space between parameter and
“mm” or “dot”.
Max. width
72mm
104mm
106mm
108mm
219.5mm
TTP-243 series
X
TTP-243 Plus series
X
TTP-244ME series
X
TTP-244ME Plus series
X
TTP-244 series
X
TTP-244CE series
X
TTP-245 series
X
TTP-245C series
X
TDP-245 series
X
TTP-246M series
X
TTP-248M series
X
TTP-2410M series
X
TDP-643 Plus series
X
TDP-643R Plus series
X
TTP-342 series
X
TTP-342 Plus series
X
TTP-342M series
X
TTP-342M Plus series
X

TSC TTP-243 Series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 DPI
Operating Temperature	5°C to 40°C (41°F to 104°F)
Memory	8 MB Flash, 4 MB SDRAM
Interface	RS-232, USB
Label Thickness	0.06 mm to 0.19 mm
Power Supply	AC 100-240V, 50-60Hz
Humidity	non-condensing