TSC TTP-243 Series Programming Manual

TSC AUTO ID Technology Co., Ltd. 16 Copyright 2009 All Rights Reserved.
 REFERENCE
Description
This command defines the reference point of the label. The reference (origin) point varies
with the print direction, as shown:
Syntax
REFERENCE x, y
Parameter Description
x Horizontal coordinate (in dots)
y Vertical coordinate (in dots)
Note: 200 DPI: 1 mm = 8 dots
300 DPI: 1 mm = 12 dots
Example
REFERENCE 10,10
See Also
DIRECTION

TSC TTP-243 Series Specifications

General

Brand	TSC
Model	TTP-243 Series
Category	Barcode Reader
Language	English