15
3.4 Ribbon Loading Instructions
1. Place an empty paper core on the ribbon rewind spindle.
2. Install the ribbon on the ribbon supply spindle.
3. Disengage the printer carriage.
4. Pull the ribbon leader to the front from beneath the printer carriage. Attach the
ribbon leader to the ribbon rewind paper core.
5. Rotate the ribbon rewind roller until the ribbon leader is thoroughly, firmly
encompassed by the black section of the ribbon.
6. Engage the printer carriage.
7. Close the printer cover and press the FEED button until the green ON-LINE
LED illuminates.
Note: Please install ribbon and media and close print head mechanism
prior to turn on power. Printer will determine direct thermal or thermal
transfer mode automatically while turning on printer power.
To Next Page
Loading...
Need help?
General
