3
2. GETTING STARTED
2.1 Unpacking and Inspection
The printer has been specially packaged to withstand damage in the shipping
process. However, for fear that unexpected damage might occur, upon receiving
the bar code printer, carefully inspect the package and the device. In case of
evident damage, contact the carrier directly to specify the nature and extent of
the damage. Please retain the packaging materials in case you need to reship
the printer.
2.2 Equipment Checklist
One bar code printer unit
One sample roll of plain label stock (Not available for 243E series printer)
One sample roll of wax-resin ribbon (Not available for 243E series printer)
One paper core for ribbon rewind spindle
Two ribbon supply/rewind spindle
One round label supply roll spindle
One label spindle with two fixing tabs
One external label roll mount/spindle (Not available for 243E series printer)
One power supply
One power cord
One Centronics interface cable (Not available for 243E series printer)
One Quick installation guide
One Windows labeling software/Windows driver CD disk
Separately purchased items may also be included. These additional items may
include:
Label
Ribbon
Memory module
Cutter (Not available for 243E series printer)
Peel off module (Not available for 243E series printer)
Portable LCD keyboard
If any parts are missing, please contact the Customer Service Department of
your purchased reseller or distributor.
To Next Page
Loading...
Need help?
General
