18
3.7 Self-test
To initiate the self-test mode, depress the MENU button. Press MENU button to
scroll the cursor to Printer test. Press EXE button to enter the submenu and
press MENU button to “Printer Config”. item. Press EXE button to print printer
internal setting. In self-test, a check pattern is used to check the performance of
the thermal print head. Following the check pattern, the printer prints internal
settings as listed below:
1. Firmware version
2. Check sum
3. Serial port setting
4. Code page setting
5. Country code setting
6. Print speed setting
7. Print density setting
8. Label size setting
9. Gap (Bline) width and offset setting
10. Backing paper transparence
11. File list
12. Memory available
Label
Liner
To Next Page
Loading...
Need help?
General
