To Next Page

To Previous Page

4.1.2 Printer Initialization

Printer Initialization will restore printer settings to defaults.

Default settings are listed as below.

Item Default Value

Cleared by

Initialization

Property Saved

when Turning off

Power

Mileage N/A No Yes

Check Sum N/A No Yes

Serial Port 9600,n,8,1 Yes Yes

Code Page 437 Yes Yes

Country Code 001 Yes Yes

Tear Mode On Yes Yes

Peel Mode Off Yes Yes

Cutter Mode Off Yes Yes

Offset 0 Yes Yes

Reference Point 0,0 Yes Yes

Print Direction 1 Yes Yes

Speed 4 inch/sec Yes Yes

Density 07 Yes Yes

Label Size 4 x 2.5” Yes Yes

Gap/Bline Sensor Gap Sensor Yes Yes

Gap(Bline) 0.12” (3 mm) Yes Yes

Transparency

Will be reset. Need

to re-calibrate the

gap sensor

Yes Yes

Ribbon Sensor

Sensitivity

1 Yes Yes

LCD Language English Yes Yes

Aux. LED Off Yes Yes

Aux. Buzzer Off Yes Yes

Download Files N/A No Yes

RTC N/A No No

Please follow the steps below to initialize the printer:

1. Turn off the printer power.

TSC TTP 246M User Manual

Other manuals for TSC TTP 246M