5
Press the MENU button to enter printer setup mode. Press the MENU button
again to proceed the cursor to the next item.
The setup is comprised of these major items: Printer Setup, Sensor Setup,
System Setup, File Setup and Printer Test. For more information, please refer to
Appendix for the structure and operation logic of the menu.
PAUSE/EXE/INC Button
This button combines three functions:
A. PAUSE button if the printer is in the Ready status. By pressing the PAUSE
button: (1) the printer stops at the completion of printing of the current
label,(2) the On-Line LED flashes, and (3) the printer holds all data in
memory. This allows for trouble-free replacement of label stock and thermal
transfer ribbon. A second depression of the PAUSE button will restart the
printer.
B. EXE/INC button if in the setup mode. Press EXE/INC button to increase the
value of parameters, or execute the selected item.
FEED/DEC Button
This button also has dual functions: Feed one label and decrease the value of
parameters.
Press the FEED button, the printer will advance one label.
Press the DEC button to change parameter settings or exit the submenu.
Print Head Lift Lever
When opening the Print Head Lift Lever, On-Line LED is lit off, the LCD display
shows “Carriage Open”. After engage the print head lift lever, press the FEED
button, printer will re-register the label and then shows READY on the LCD
display, and the screen will return to ready condition.
Ribbon Tension Adjustment Knob
The ribbon tension adjustment knob offers 6 levels of tension to adjust for
different widths of ribbon. Turn the ribbon tension knob clockwise and you will
hear a light click sound as the gear changes. The level of rewind ribbon is from
loose to tight, level 0 to level 5. You will hear a louder click for level 1.
Print head Pressure Adjustment Knob
The print head adjustment knobs are used to fine tune print quality for
To Next Page
Loading...
Need help?
General
