10 Chapter 2
DO NOT use the instrument or probes near hazardous
voltage sources since serious injury could result.
Thermocouple Ports
The 9565 series includes two thermocouple ports at the base of the
meter. Any K-Alloy thermocouple with mini-connector can be
attached. See Display Setup for setting the thermocouple
temperature readings to be displayed as TC1, TC2, or TC1-TC2.
Connecting the Thermocouples
The K-Alloy thermocouple with mini-connector has one terminal
wider than the other. The wider terminal will be inserted into the
bottom of the TC1 or TC2 connector port.
Thermocouples from an alternate TSI supplier must have
the metal sheath electrically isolated from the wires
inside. Failure to meet this requirement may result in
false readings, electrical shock, or fire hazard.
DO NOT use the instrument or probes near hazardous
voltage sources since serious injury could result.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
